KTM, Husqvarna and GasGas: Keihin 812.41/796.41 via OBD
Autotuner adds OBD Normal Read and writing for Keihin 812.41 and 796.41 in selected off-road and sport motorcycles.
Read articleCT PERFORMANCE · TECHNOLOGY NEWS
Autotuner. FLEX. KESS3.
What is changing.
New ECU and TCU support, Bench/Boot unlocks and important tool updates. With sources and a brief explanation of their workshop relevance.
KESS3 3.68: unlock MD1CS089 locally and work in Bench
Bosch MD1CS089 gains Boot unlock with the KESS3 Unlock Module. Reading and writing in Bench are then possible.
Read articleHonda Fireblade, Africa Twin and Hornet: new OBD access
Autotuner now supports Honda Euro 5 motorcycles with Keihin RH850 through the diagnostic port. This simplifies access to the engine software.
Read articleTractors and municipal vehicles: read, write and clone EDC17C49
KESS3 3.67 expands Bench and Boot support for Bosch EDC17C49. Data transfer to a compatible replacement control unit is also supported.
Read articleGWM, Haval, JAC and BAIC: additional OBD access for diesel models
Delphi DCM3.7AP and DCM6.2AP can be read and written through the diagnostic port with Autotuner. The new support covers selected 2.0-liter diesels.
Read articleFiat Ducato and working machines: Korhex expands ECU unlock support
FLEX 8.26 adds Korhex support for Bosch MD1CS069 and MD1CS089 with TC299. After unlocking, work can continue in Bench mode.
Read articleGWM, Isuzu, JAC and Foton: Delphi control units now via OBD
Delphi DCM7.1AP and DCM7.24 gain OBD reading and writing support for selected pickups, vans and light trucks.
Read articleHonda motorcycles and scooters: Bench access for Keihin 38770
KESS3 3.66 adds Bench Virtual Reading for Keihin 38770-XXX-XXX with RH850. The control unit remains closed when connected through its plug.
Read articleHyundai and Kia SIM2K-510: manufacturer announces October 30 release
Magic Motorsport has announced an upcoming SIM2K-510 solution. As of October 16, this is an announcement, not yet confirmed available protocol support.
Read articleVolvo and Renault Trucks: new Bench access for EMS2.3 and EMS2.4
Autotuner supports TRW EMS2.3 and EMS2.4 in suitable Euro 6 trucks and machinery. The special ATUBC130 Bench cable is required for connection.
Read articleYamaha N-Max and X-Max 125: new Bench and Boot options
KESS3 3.65 expands access to Denso XXX-H594A-XX. Bench works with an original file from the database; Boot allows full reading and writing.
Read articleMyFlasher 2.8.0: view vehicle measurements directly in the app
The new iOS and Android app update displays logged engine data as interactive curves and improves the connection to Autotuner One.
Read articlePeugeot, Citroën and DS 1.6 THP: new OBD access
Bosch MED17.4 with TC1796 can now be read and written directly through the diagnostic port. Support expands the options for suitable 1.6 THP gasoline models.
Read articleJaguar and Land Rover gasoline hybrids: unlock MG1CS028
KESS3 3.64 enables Boot unlock of protected Bosch MG1CS028 units. Boot and Bench are then available for further work.
Read articleScania R and S: Continental EMS10/CEM1 via OBD in beta
Autotuner adds actual OBD reading and writing for Continental EMS10/CEM1 in selected Scania R and S models with DC13 and DC16 engines.
Read articleJaguar and Land Rover 2.0 MHEV diesel: new ECU unlock
Bosch MD1CP017 in D165 and D200 MHEV models from 2021 can be fully read and written in Bench mode after a Boot unlock with KESS3.
Read articleScania, Doosan and Develon: EMS S6/S8 now via OBD in beta
Autotuner expands OBD Normal Read for Motorola EMS S6 and Continental EMS S8. New support covers trucks and selected industrial and construction machinery with Scania engines.
Read articlePorsche MG1: Korhex adds local ECU unlock
FLEX 8.25 adds Korhex Boot Glitch for Porsche Bosch MG1CP007 and MG1CS047 with TC299. Bench programming is possible after unlocking.
Read articleBMW M2, M3, M4 and Alpina: S58 control units now via OBD
KESS3 3.62 adds OBD reading and writing for Bosch MG1CS049 after an initial Bench unlock. New options for custom tuning of supported S58 models.
Read articleRenault E-Tech and Alpine A290: new software access for EVs and hybrids
Bosch VC1CP010 is supported by Autotuner in Bench mode after a mail-in unlock. Support covers selected electric and hybrid models from the Renault-Nissan-Mitsubishi Alliance.
Read articleTriumph Daytona and Triple: expanded OBD software tuning
FLEX 8.24 supports Keihin KTKSv2 in current Triumph motorcycles. On suitable variants, programming takes place directly on the motorcycle without ECU removal.
Read articleIveco, Case IH and New Holland: unlock FPT control units locally
KESS3 3.61 adds Boot unlock for protected Bosch MD1CE101 in FPT applications from 2021. Further work is then possible via OBD or Bench.
Read articleVolvo Denso VEA Gen2: Bench access and OBD after unlock
Denso VEA Gen2 with SPC5777M can now be read and written via Bench. A one-time Bench unlock subsequently enables OBD with a patch.
Read articleClaas Arion and John Deere 6M/6R: Phoenix L33M via OBD
KESS3 3.60 supports suitable tractors from 2025 with the PowerTech 6.8-liter engine and Phoenix L33M. Software can be read and written through the diagnostic port.
Read article